Elkay EFRU718 Installation Guide

Browse online or download Installation Guide for Kitchen sinks Elkay EFRU718. Elkay EFRU718 Installation Guide User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
ATTENTION INSTALLER:
1) ELKAY RECOMMENDS THAT UNDERMOUNT SINKS SHOULD BE INSTALLED BY A PROFESSIONAL EXPERIENCED
INSTALLER.
2) WARNING: THE ENCLOSED CUTOUT TEMPLATE WILL CREATE AN OVERHANG OF APPROXIMATELY 1/8". IT IS
RECOMMENDED THAT YOU DISCUSS THIS WITH YOUR CUSTOMER AND AGREE THAT THIS FINISHED
APPEARANCE IS THE DESIRED EFFECT. ELKAY IS NOT RESPONSIBLE FOR IMPROPER SINK OR COUNTERTOP
INSTALLATIONS. DUE TO THE AESTHETIC QUALITIES OF THE CONVERGING BOWL RADII, THE TEMPLATE
FURNISHED WITH EACH SINK PROVIDES THE ONLY OPENING RECOMMENDED FOR INSTALLATION OF ELKAY
UNDERMOUNT SINKS. SEE ILLUSTRATION BELOW.
3) ELKAY UNDERMOUNT SINKS SHOULD ONLY BE FASTENED TO A SOLID SURFACE COUNTERTOP
(I.E. GRANITE/CORIAN
®
/SILESTONE
®
).
4) ELKAY IS NOT RESPONSIBLE FOR SINK OR COUNTERTOP IF DAMAGED DURING INSTALLATION.
5) METAL EDGES MAY BE SHARP – USE CAUTION WHEN HANDLING.
6) FOLLOW ALL LOCAL PLUMBING AND BUILDING CODES.
7) INSPECT SINK FOR DAMAGE PRIOR TO BEGINNING INSTALLATION.
INSTALLING SINK
1. Position template on countertop. Locate the
template front to rear, so that sink will not inter-
fere with the cabinet.
2. Trace a line around the template. Cut along the
inside of this line to provide opening. This size
opening will provide approximately an 1/8" over-
hang of countertop. (Please see item #2 under
Attention Installer.)
3. Locate and drill the mounting holes (following
the countertop manufacturer’s instructions) as
shown below. Holes should allow even spacing
of mounting brackets around the sink. Type of
fasteners to be as recommended by countertop
supplier.
4. Fasten mounting brackets to countertop loosely.
5. Using a good quality silicone caulk, apply a bead
evenly all around the top of the sink flanges.
6. Position and align sink over the countertop
opening. Press silicone onto countertop.
7. Tighten fasteners until mounting brackets are
snug against sink.
8. Check alignment of sink to countertop opening.
9. Tighten down fasteners evenly. Be careful not to
overtighten. Remove excess silicone.
MOUNTING
BRACKET
COUNTERTOP
SILICONE CAULK
(NOT FURNISHED)
SINK
1-3/8"+1/4"
FASTENER
(NOT FURNISHED)
1/8" (APPROX.)
OVERHANG
1/8" Countertop
Overhang
EFU, EFRU, PLAFRU, and COSTCO SCUZ Series
Undermount Stainless Steel Sinks with 1/8" Overhang
Countertop Installation
Installation Instructions
Page view 0
1 2

Summary of Contents

Page 1 - Installation Instructions

ATTENTION INSTALLER:1) ELKAY RECOMMENDS THAT UNDERMOUNT SINKS SHOULD BE INSTALLED BY A PROFESSIONAL EXPERIENCEDINSTALLER.2) WARNING: THE ENCLOSED CUTO

Page 2

Suggestions for the Care and Cleaningof your Elkay Stainless Steel SinkRECOMMENDED CLEANSERSElkay has tested general household cleansers to measure th

Comments to this Manuals

No comments